Makes changing tires a snap. The new shape and surface of the tire lever makes the assembly and disassembly of a tire more enjoyable. For both tires and hands too!

The new tire levers are especially helpful in difficult assembly operations. Clip it onto the rim, to fix the already mounted section of the tire, and it won‘t slide out when the last section is levered onto the rim.

Patent Pending

The colour blue is a trademark of Park Tool for bicycle tools and is used under license.

The third important factor - besides tube and tire - for puncture protection. The rim tape effectively protects the tube against mechanical damage, for example from spoke heads and metal burrs around the spoke holes.

Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!

IDEALLY SUITED FOR TUBELESS CONVERSIONS. Produced by the tubeless specialists from Stan’s NoTubes! Doc Blue Professional is our recommendation for use with Schwalbe TLE tires and guarantees easy handling and optimum, fastest sealing.

60-ml-Bottle

HOW TO USE For preventive puncture protection and tubeless conversion. Filling quantities: tires from 23 - 60 mm -> 60 - 90 ml / tire, from 62 -100 mm -> 90 -120 ml / tire. Shake well! Effective up to 7 months. Unsuitable for significant defects (cuts/bursts). Tubeless conversion only with wheels and tires suitable for tubeless applications.

With the new self-adhesive patches from Schwalbe you can repair a flat tube fast and without any difficulty.

Made from high-quality polyester that is light, yet withstands high pressures. The special adhesive prevents slipping under high loads and temperatures. Pair-set with valve hole.

The digital pressure gauge is very precise, measuring pressures up to 11 bar and is suitable for both Auto and Presta valves. It will also function with Schwalbe's 'classic' bicycle valve.

Test tire pressures at least once per month with a pressure gauge. Testing by thumb is completely unreliable as with just half of the required pressure the tire will feel hard. Insufficient air pressure is the most common bicycle problem that results in dramatically increased rolling resistance and premature tire wear.

IDEALLY SUITED FOR TUBELESS CONVERSIONS. Produced by the tubeless specialists from Stan’s NoTubes! Doc Blue Professional is our recommendation for use with Schwalbe TLE tires and guarantees easy handling and optimum, fastest sealing.

500-ml-Bottle

HOW TO USE For preventive puncture protection and tubeless conversion. Filling quantities: tires from 23 - 60 mm -> 60 - 90 ml / tire, from 62 -100 mm -> 90 -120 ml / tire. Shake well! Effective up to 7 months. Unsuitable for significant defects (cuts/bursts). Tubeless conversion only with wheels and tires suitable for tubeless applications.

For high pressure (Presta) valve with removable valve core. Aluminum. 2 per set. Valve core removal key included. Tubeless compatible.

The valve extensions in 30mm and 65mm.

The third important factor - besides tube and tire - for puncture protection. The rim tape effectively protects the tube against mechanical damage, for example from spoke heads and metal burrs around the spoke holes.

This economical polyester tape is still available in a 50 m roll. Ideal for a workshop.

The tubeless rim tape is extremely user friendly and at the same time very high pressure resistant. Even on road bikes a single ply of tape is sufficient.

Only use wheels that have been specifically approved by the manufacturer for Tubeless conversion. Especially with the high-pressure demands on race bikes this is very important. Only the wheel maker’s approval ensures that the rim is up to the particular stresses in operation and the tubeless tire will be secure. All important information and advice about Tubeless can be found at: www.schwalbetires.com/tubeless-technology/

The Tubeless Valves are available in the stem lengths of 40mm, 60mm, 100mm and are a breeze to fit. There is a suitable valve solution for every rim depth.

The valve base can be securely mounted in the rim with a key(4mm) without over tightening. The shortened cone ensures a low installation height and thus more space for the the tire beads. Thanks to the large valve inner diameter (4mm), the tire can be inflated with air and sealing fluid particularly effectively.

Made from high-quality polyester that is light, yet withstands high pressures. The special adhesive prevents slipping under high loads and temperatures. 25m workshop roll.

13in1 Multi tool with valve functions. Handy tool that integrates the functions for valve cores (SV and AV) and valve extensions.

Tools: 2, 2.5, 3, 4, 5, 6, 8 mm hex 25 mm Torx, slotted screwdriver, bottle opener.

Functions: SV valve core, valve extension SV, AV valve core

With the TIRE BOOSTER, tubeless tire assembly can be accomplished easily. Even without a compressor. With a power of up to eleven bar every tire immediately seats itself safely on the rim and K275:L277seals everything evenly. If you need an even bigger flow of air, a special adapter is also available. The 435 g light, handy cylinder is the perfect remedy for every tubeless tire assembly, whether at home or on your trips.

Only for SV valves.

Special mounting fluid for bicycle tires. In the practical 1L refill bottle. When inflating the tire bead slides easily into the correct position on the rim. After about 10 minutes, the liquid evaporates completely!

Light and practical. This Schwalbe saddlebag comes complete with one tube and two tire levers. Bag simply mounts with Velcro hook and loop straps. Included: 1 x Schwalbe SV13 tube (Presta valve, fits tire size 26 x 1.50-2.35).

Tire Levers: The blue color is a trademark of Park Tool for bicycle tools and is used under license.

The Tread Cutter is the first set of pliers made specifically to fine-tune MTB tires. With it, you can cut the tread blocks down with a smooth edge and – thanks to the cuttingheight adjustment – to your exact required height.

Light and practical. This Schwalbe saddlebag comes complete with one tube and two tire levers. Bag simply mounts with Velcro hook and loop straps. Included: 1 x Schwalbe SV19 tube (Presta valve, fits tire size 700 x 40-62).

Tire Levers: The blue color is a trademark of Park Tool for bicycle tools and is used under license.